Request Quote
MAIN PRODUCTS
NM360 Wear Resistant SteelSpecification Range of NM360 Wear Resistant Steel Plate:
Thickness: 8mm-300mm
Width:1500mm-4020mm
Length: 3000mm-18000mm
Adopting standards: WYJ030-2005
Dimensin,shape,weight and allowable deviation according to standards: GB709-88 or EN10029
Supplied in the as-rolled condition: Q&T or Tempered
Ultrasonic test: GB/T2970-91 or EN10160-1999Read More- Abrasion Resistant Steel PlateWear Steel Standards:
NM360, NM400, NM450, NM500
NR360, NR400
KN-55, KN-60, KN-63
AR400, AR450, AR500, AR600Read More - Stainless Steel PlateStandard: 302, 304, 304L, 309, 316, 316L, 317, 321, 330, 403, 409, 416, 440C, Duplex 2507
Sizes: from 3/16" to 2" thick x 48" or 60" wide x 96/120/144 lengths
Chemical composition, mechanical properties, weldability and corrosion resistance provide the best all-round performance stainless steel plate at relatively low cost.Read More - SUS201/201 Stainless steel plateSus201/201 stainless steel is a widely used precipitation hardening grade, high hardness, high strength, good corrosion resistance. Its performance is similar to that of SS302 stainless steel.
SS202 machinability to produce long rubber chip. It can also be processed in the annealed state. For full martensitic transformation and heat treatment, the material must be immersed at 1038°C(1900°F) for 30 min and cooled below 16°C(60°F). Do not use oxyacetylene welding connection. 202 steel material can be welded by ordinary fusion resistance method. SS 202 has good toughness at low temperature.
Grade 202 or 201 materials can be made into rolls, plates, strips, lines, tubes, profiles, bars, angles, etc.Read More - SUS201/201 Stainless steel coilSus201/201 stainless steel is a widely used precipitation hardening grade, high hardness, high strength, good corrosion resistance. Its performance is similar to that of SS302 stainless steel.
SS202 machinability to produce long rubber chip. It can also be processed in the annealed state. For full martensitic transformation and heat treatment, the material must be immersed at 1038°C(1900°F) for 30 min and cooled below 16°C(60°F). Do not use oxyacetylene welding connection. 202 steel material can be welded by ordinary fusion resistance method. SS 202 has good toughness at low temperature.
Grade 202 or 201 materials can be made into rolls, plates, strips, lines, tubes, profiles, bars, angles, etc.Read More - S32750 Stainless steel plateDuplex stainless steel is a kind of stainless steel material. They are called biphasic (or austenite-ferrite) because their metallurgical structure consists of two phases, with almost equal proportions of austenite and ferrite. These materials have improved corrosion resistance, particularly chloride stress corrosion and chloride pitting, and have higher strength than standard austenitic stainless steels such as SS304 or SS316. Compared with austenitic stainless steel, the main difference in composition of duplex steel is the chromium content of 20-28% higher; Molybdenum content is high, up to 5%; The nickel content was reduced to 9% and the nitrogen content was reduced to 0.05-0.50%. Both low nickel content and high strength are significantly cost effective.Read More
- S32205 Stainless steel plateDuplex stainless steel is a kind of stainless steel material. They are called biphasic (or austenite-ferrite) because their metallurgical structure consists of two phases, with almost equal proportions of austenite and ferrite. These materials have improved corrosion resistance, particularly chloride stress corrosion and chloride pitting, and have higher strength than standard austenitic stainless steels such as SS304 or SS316. Compared with austenitic stainless steel, the main difference in composition of duplex steel is the chromium content of 20-28% higher; Molybdenum content is high, up to 5%; The nickel content was reduced to 9% and the nitrogen content was reduced to 0.05-0.50%. Both low nickel content and high strength are significantly cost effective.Read More
- S31603/316L Stainless steel plateS31603/316L stainless steel is the second most commonly used austenitic stainless steel than 304 stainless steel. Due to the addition of Mo, SS 316 has a great improvement in corrosion resistance and certain properties compared to SS304. 316 reduced chromium content, increased nickel content, and added 2-3% Mo. The addition of Mo can enhance the resistance "to pitting and crevice corrosion caused by chloride. Therefore, 316 SS is widely used in marine applications or sea environmental situation popularly.Read More
ABOUT US
Xingsheng Steel Qingdao Co., Ltd. is the production of all kinds of stainless steel plate, carbon steel plate, carbon steel coil plate, galvanized steel plate, color coated steel plate and other products manufacturers, complete testing equipment, strong technical force. The company has a complete range of products, high quality, reasonable price, sufficient supply, complete specifications, short delivery cycle characteristics.
The products have passed ISO9001 quality system certification and MTC quality certification according to EN10204.3.1.
Lear More
Why Choose Us
Professional Experiences
Successfully reached profitable and satisfactory contracts with many domestic and foreign enterprises
Efficient Procurement & Inspection
In order to meet the demands of diverse market and maintain a competitive Edge. has set up a specialized Procurement Department including Inspection Administrations. From Manufacturer Audit, making quality plans, pre-inspection meeting, witness of
Complete Traceability
Every single product from is completely traceable for each process, including raw material control, Heating No, Batch No, Product No. Once the Non-qualified material is found, corresponding test and improvement will be done accordingly.
Classification navigation
Stainless steel plate
Ordinary steel plate
Alloy Steel Plate
Pressure Vessel Steel
Wear-resistant Steel Plate
Weathering Steel Plate
Galvanized steel plate
Color coated steel plate
- Stainless Steel PlateStandard: 302, 304, 304L, 309, 316, 316L, 317, 321, 330, 403, 409, 416, 440C, Duplex 2507
Sizes: from 3/16" to 2" thick x 48" or 60" wide x 96/120/144 lengths
Chemical composition, mechanical properties, weldability and corrosion resistance provide the best all-round performance stainless steel plate at relatively low cost. - SUS201/201 Stainless steel plateSus201/201 stainless steel is a widely used precipitation hardening grade, high hardness, high strength, good corrosion resistance. Its performance is similar to that of SS302 stainless steel.
SS202 machinability to produce long rubber chip. It can also be processed in the annealed state. For full martensitic transformation and heat treatment, the material must be immersed at 1038°C(1900°F) for 30 min and cooled below 16°C(60°F). Do not use oxyacetylene welding connection. 202 steel material can be welded by ordinary fusion resistance method. SS 202 has good toughness at low temperature.
Grade 202 or 201 materials can be made into rolls, plates, strips, lines, tubes, profiles, bars, angles, etc. - SUS201/201 Stainless steel coilSus201/201 stainless steel is a widely used precipitation hardening grade, high hardness, high strength, good corrosion resistance. Its performance is similar to that of SS302 stainless steel.
SS202 machinability to produce long rubber chip. It can also be processed in the annealed state. For full martensitic transformation and heat treatment, the material must be immersed at 1038°C(1900°F) for 30 min and cooled below 16°C(60°F). Do not use oxyacetylene welding connection. 202 steel material can be welded by ordinary fusion resistance method. SS 202 has good toughness at low temperature.
Grade 202 or 201 materials can be made into rolls, plates, strips, lines, tubes, profiles, bars, angles, etc. - S32750 Stainless steel plateDuplex stainless steel is a kind of stainless steel material. They are called biphasic (or austenite-ferrite) because their metallurgical structure consists of two phases, with almost equal proportions of austenite and ferrite. These materials have improved corrosion resistance, particularly chloride stress corrosion and chloride pitting, and have higher strength than standard austenitic stainless steels such as SS304 or SS316. Compared with austenitic stainless steel, the main difference in composition of duplex steel is the chromium content of 20-28% higher; Molybdenum content is high, up to 5%; The nickel content was reduced to 9% and the nitrogen content was reduced to 0.05-0.50%. Both low nickel content and high strength are significantly cost effective.
- Cold Rolled Steel CoilStandard: JIS G3141: SPCC, SPCD, SPCE.
GB Q195,Q235
GB/T5213-2008: DC03, DC04, DC05
Q/BQB 419-2009: HC260LA, HC380LA, HC420LA, HC260P, HC300P, HC260Y. - Hot rolled steel plateHot rolled steel is after high temperature heating rolled steel, its strength is not very high, but enough to meet our use, its plasticity, weldability is good, so we are more commonly used; Cold rolled steel is common hot rolled steel after strong drawing beyond the strain hardening stage of steel, it has high strength, but poor toughness, weldability, relatively hard and brittle. Hot rolling is processed at high temperature. Hot rolling means that the material needs to be heated during or before steel rolling. Generally, rolling should be heated to the recrystallization temperature above.
- SS400 steel coilSS400 is one of the most commonly used hot rolled general structural steel.SS400 steel plate, JIS3101 SS400 steel plate, under JIS3101 standard, we can regard SS400 steel plate as Carbon and low alloy steel SS400 steel plate is one mainly of Carbon and low alloy steel, SS400 steel plate would be used to built containers which can bear low temperature sea water.
- S335JR Steel PlateS335JR - an useful structural grade steel with a minimum yield strength of 355 N/mm². S355 being widely used in the structural engineering and construction industries, S355 offers high yield and tensile strength and is supplied with a variety of treatments and test options to ensure that it is a highly usable steel in your various projects.
- Titanium alloy plateDedicated to creating first-class quality alloy steel products: alloy plate, alloy pipe, alloy round steel, alloy flange, pipe fittings.Its materials include: Hastelloy alloy, Ni-Cr alloy, Ink Ni-Cr alloy, Inconel alloy, Monel alloy, titanium alloy and so on.We pursue first-class quality, and professional is the company's unremitting pursuit.
- Monel alloy plateDedicated to creating first-class quality alloy steel products: alloy plate, alloy pipe, alloy round steel, alloy flange, pipe fittings.Its materials include: Hastelloy alloy, Ni-Cr alloy, Ink Ni-Cr alloy, Inconel alloy, Monel alloy, titanium alloy and so on.We pursue first-class quality, and professional is the company's unremitting pursuit.
- Inconel alloy plateDedicated to creating first-class quality alloy steel products: alloy plate, alloy pipe, alloy round steel, alloy flange, Its materials include: Hastelloy alloy, Ni-Cr alloy, Ink Ni-Cr alloy, Inconel alloy, Monel alloy, titanium alloy and so on. We pursue first-class quality, and professional is the company's unremitting pursuit.
- Incoloy alloy plateDedicated to creating first-class quality alloy steel products: alloy plate, alloy pipe, alloy round steel, alloy flange, Its materials include: Hastelloy alloy, Ni-Cr alloy, Ink Ni-Cr alloy, Inconel alloy, Monel alloy, titanium alloy and so on. We pursue first-class quality, and professional is the company's unremitting pursuit.
- Pressure Vessel Steel PlateStandard: A202, A203, A204, A285, A299, A302, A387, A515, A516, A517, A533, A537, A612, A662, EN10028-2, EN10028-3, EN10028-5, EN10028-6, JIS G3103, JIS G3115, GB713, GB3531, DIN 17155
Pressure vessel steel plate is used for many applications where the pressure inside is significantly higher than atmospheric pressure. - Steel Plate ASTM A285/A285MStandard: A202, A203, A204, A285, A299, A302, A387, A515, A516, A517, A533, A537, A612, A662, EN10028-2, EN10028-3, EN10028-5, EN10028-6, JIS G3103, JIS G3115, GB713, GB3531, DIN 17155
Pressure vessel steel plate is used for many applications where the pressure inside is significantly higher than atmospheric pressure. - DIN standard 19MN6 17MN4 15Mo3 Pressure vessel steel plate19Mn6 steel plate,19Mn6 boiler steel plate,19Mn6 pressure vessel steel plate.According to steel standard DIN 17155,boiler steel plate 19Mn6 owned the minimum yield strength at 355Mpa,and tensile strength shall be within 510Mpa to 650Mpa for the steel plate thickness belows and equal to 60mm,now xinsteel have the ability to offer boiler steel plate 19Mn6 the maximum thickness till 300millimeters guarantee the steel property.EN 10028-2 P355GH is the best similar steel grade to boiler steel plate 19Mn6.
- SA203 GR.F ASTM A302 Grade A Mn-Mo Alloy Pressure Vessel Steel PlatePressure vessel plate Steel plate used for manufacturing steam boilers, pressure vessels and other pressure vessel structural parts. This steel plate due to withstand a certain pressure and water pressure, and different temperature environment, such as high, medium, low temperature, so the requirements of this steel plate is more strict.
- NM360 Wear Resistant SteelSpecification Range of NM360 Wear Resistant Steel Plate:
Thickness: 8mm-300mm
Width:1500mm-4020mm
Length: 3000mm-18000mm
Adopting standards: WYJ030-2005
Dimensin,shape,weight and allowable deviation according to standards: GB709-88 or EN10029
Supplied in the as-rolled condition: Q&T or Tempered
Ultrasonic test: GB/T2970-91 or EN10160-1999 - Abrasion Resistant Steel PlateWear Steel Standards:
NM360, NM400, NM450, NM500
NR360, NR400
KN-55, KN-60, KN-63
AR400, AR450, AR500, AR600 - ASME SA 387 GRADE 12 Class 1 steelASME SA 387 GRADE 12 Class 1,ASME SA387 Grade 12 Alloy Steel Plates
Engineered for use in elevated temperature service, is a chrome molybdenum carbon alloy steel for use in weldable pressure vessels and industrial boilers.
The material benefits from added chromium which provides excellent corrosion and oxidation resistance making it ideal for sour service applications in the oil and gas industry. - NM600 Wear-resistant steel plateNM600 wear-resistant steel plate is widely used in mining machinery, coal mining machinery, environmental protection machinery, construction machinery, etc., and is also commonly used as high-strength structural steel
- S355JOWP SteelCorrosion resistant steel plate S355J0WP under standard EN 10025-5 is mainly used for container steel.Flat products made of S355J0WP steel have the condition of delivery Normalized rolled.Between S355J0WP and S355J2W,S355J2WP contains more P in chemical composition.If mechincal properties have been significantly modified by heavy cold forming,either stress relief annealing or normalized may be applied.
- JIS G3125 SPA-H Corten steelJIS G3125 SPA-H Corten steel,SPA-H steel plate/Sheet. SPA-H low alloy high strength atmospheric corrosion resisting steel.
Key words:SPA-H, JIS G3125 SPA-H hot rolled steel, JIS G3125 SPA-H steel plate/sheet/bar/section steel. JIS G3125 SPA-H Corten steel, SPA-H Weathering steel, SPA-H Weathering resistant steel, SPA-H atmosphere corrosion resistance steel.
JIS G3125 SPA-H Corten steel widely used in air preheater, economizer, railway carriage, containers production, bridge building , construction and so on.
E-mail - Corten A steelCorten A is a weather resistant steel created by alloying copper, chromium and nickel. In addition to this, Corten A has added phosphorous which makes the material best suited for gas flue applications and for aesthetic facias.
- ASTM A709 SteelA high-strength, low-alloy structural steel plate utilized primarily in the manufacture of bridges. Gnee steel stocks A709 Grade 36, A709 Grade 50 and A709 Grade 50W. These grades are often specified with Charpy tests referencing the specific zone or lowest anticipated service temperature.
- Galvanized Steel PlateGalvanizing is a zinc coating applied to sheets of steel through a process called “continuous hot-dip,” in which steel sheet passes through a bath of molten zinc. The liquid zinc bonds to the iron in the steel forming a protective layer on both sides of the sheet.
- DX51D Galvanized coilDX51D galvanized sheet material is a non-ferrous alloy mainly composed of zinc as the matrix and other elements. The main alloy elements are aluminum, copper, magnesium, etc. Zinc alloy has low melting point, good fluidity, easy plastic processing and welding, and is resistant to atmospheric corrosion. According to the manufacturing process, it can be divided into cast zinc alloy and deformed zinc alloy. The commonly used cast zinc alloy is zinc aluminum copper magnesium alloy. Its casting process performance is good, and the cooling rate has little impact on the mechanical properties. It is mainly used to manufacture mechanical parts, toys, decorations, household appliances, etc.
- DC01 Galvanized coilDC01 Galvanized steel sheet is used for automobiles, sanitary ware, food machinery, pressure vessels, nuclear power, chemical equipment, elevators, rail transit, machinery manufacturing, structural piping, and architectural decoration.
- SGCC Color-coated Galvanized Steel CoilGnee steel specialize in Prepainted Galvanized Steel Coil, PCM and VCM steel sheet. With over 20 year’s experience, we accumulated the advantage and techniques with high quality and reasonable price. If you want to know more about Prepainted Galvanized Steel Coil, please feel free to contact us, we will reply you within 24 hours.
- PPGI & PPGL Sheet CoatingThe total thickness of the pre-painted galvalume steel coil is composed of the base steel – coating -primer – top paint – protective layer thickness. The top paint thickness is 10-25μm, and the back paint thickness is 5-20μm. The thinner the base steel thickness, the higher the price of the ppgi steel coil, because the processing cost becomes higher.
- DX51D Prepainted Galvanized Steel Coil PPGIGnee steel specialize in Prepainted Galvanized Steel Coil, PCM and VCM steel sheet. With over 20 year’s experience, we accumulated the advantage and techniques with high quality and reasonable price. If you want to know more about Prepainted Galvanized Steel Coil, please feel free to contact us, we will reply you within 24 hours.
Recent News
- What Is the Difference Between Hot Rolled vs Cold Rolled Steel?In short, hot-rolled steel is processed at the mill at high temperatures and that’s it. On the other hand, cold rolled steel is processed as a hot roll, but once it has cooled to room temperature, it received additional processing for different benefits.Read More
- Bearing capacity of stainless steel plateStainless steel plate is widely used in our life, which also pays attention to its excellent performance, many people are more interested in the carrying capacity of stainless steel plate, in fact, its carrying capacity is another way to prove its quality:Read More
- What is the difference between cold binding plate and galvanized plate?1, cold binding plate: hot rolled coil as raw material, at room temperature under the recrystallization temperature to stop rolling products.
2, galvanized plate: refers to the appearance of a layer of zinc plated steel plate. - Hot rolled pickling plate do you know?Hot rolled pickling coil is made from slab (mainly continuous casting billet), which is heated and made into strip by roughing mill and finishing mill. The hot steel strips from the finishing mill are cooled to the set temperature by laminar flow and then rolled into steel strip coils by the coiler. The cooled steel strip coils are removed from the surface of the steel sheet after pickling.
- Do you know the difference between hot galvanizing and cold galvanizing?Hot dip galvanizing: also called hot dip zinc and hot dip galvanizing: it is an effective way of metal anticorrosion. It is to melt the zinc ingot at high temperature, put some auxiliary materials in, and then dip the metal structural parts into the galvanized groove, so that a layer of zinc layer is attached to the metal components, so as to play the purpose of anticorrosion. The advantage of hot dip galvanized is that its anticorrosion ability is strong, the adhesion and hardness of galvanized layer is better, so as to play the purpose of anticorrosion.
- Which places can 65MN steel plate be used inThere are many kinds of steel plate, different types of products have different advantages in the use of the process, we can also look at the specific use of the site? Through a detailed understanding of the ability to better choose and buy, but also can ensure the use of the time to play a better role.
PLEASE GIVE US AMESSAGE
Scan QR code to add Whatsapp!