Width | 0.6m-3m or as your requirement |
Thickness | 0.1mm-300mm or as your requirement |
Standard | AISI,ASTM,DIN,JIS,GB,JIS,SUS,EN,etc. |
Technique | Hot rolled |
Surface Treatment | Clean, blasting and painting according to customer requirement |
Surface Treatment | ±0.02mm |
Material | Q245R , Q345R , HIC , 12CR1MOVR , 14CR1MOVR , 15CRMOR , 12CR2MO1R , 09MnNiDR , WDB620 , 13MnNiMoR , 20MnHR , 16MnHR , SA516Gr60 , SA516Gr65 , SA516Gr70 , SA387cr11 , SA387cr12 , SA387cr22 , SA533M , P235GH , P265GH , P295GH , P355NH , P355GH , 10Crmo9-10 , 11Crmo9-10 , 15Mo3 |
Application | It is mainly used to make structural parts such as car girder, beam, transmission shaft and car chassis parts, which can reduce the weight of the parts. |

SA514 GR.C Boiler and Pressure Vessel Steel Plate Descriptions:
ASME SA514 standard specification for pressure vessel plates, carbon steel, for intermediate-and higher-temperature service
ASME SA514 grade C plates shall be normalized.
Chemical Composition and Mechanical Properties:
SA514 Grade C Chemical Composition |
SA514 Grade C | The Element Max (%) |
|
|
C | Mn | P | S | Si | Ni | Cr | Mo | V | Ti | Zr | Cu | B | Nb |
0.10-0.20 | 1.10-1.50 | 0.035 | 0.035 | 0.15-0.30 | - | - | 0.15-0.30 | - | - | - | - | 0.001-0.005 | - |
Carbon Equivalent: Ceq = 【C+Mn/6+(Cr+Mo+V)/5+(Ni+Cu)/15】%
Grade | SA514 Grade C Mechanical Property |
Thickness | Yield | Tensile | Elongation |
SA514 grade C | mm | Min Mpa | Mpa | Min % |
20 | 690 | 760-895 | 18 |
20-65 | 690 | 760-895 | 18 |
65-150 | 620 | 690-895 | 18 |